This is a new Hobbyweld Oxygen Original Gas Bottle and includes a £70 deposit charge.
This Brand New Hobbyweld Oxygen Original Welding Gas Bottle is commonly and traditionally used with a fuel gas (acetylene, propane or propylene) for cutting, welding, brazing and soldering.
This supports the combustion of these gases and enables a much higher flame temperature to be achieved in comparison with air.
Our oxygen cylinders are filled from a bulk tank which ensures optimum purity, a 1% reduction in purity can increase consumption of oxygen by 20% or more, so you can see the benefits of a professionally filled gas bottle.
Combine this gas bottle with our Hobbyweld Acetylene cylinder for the perfect portable rent-free gas welding kit.
Other useful information:
- Height: 860mm (approximate)
- Diameter: 140mm (approximate)
- Water Capacity: 9 litre
- Gas Pressure: 137 bar / 1987 psi
- Volume: 1.29m³
- Cylinder Outlet: 5/8″ BSP RH Female
- Cylinder Tare Weight: 17.000 kg (approximate)
Need to return your cylinder?
If you need to return the cylinder, just return the cylinder to us and collect the return deposit value that’ll be due to you.
Note: you will need your deposit form and a small admin charge applies which will be deducted from the returnable deposit value.
Safety Note: In line with The Acetylene Safety Regulations 2014, FBAs (Flash Back Arrestors) and regulators must be fitted when connected to acetylene equipment. Rent Free Gas Cylinders cannot be held responsible for the misuse of these products.
If you require any assistance or advice, please call our sales team on 01903 700 778.
